Este sitio utiliza cookies propias y de terceros. Si continúa navegando consideramos que acepta el uso de cookies. OK Más Información.

Mensajes recientes

Páginas: [1] 2 3 ... 10
1
DCS: World - General / Re:Leatherneck: F-14A/A+/B
« Último mensaje por Silver_Dragon en Ayer a las 18:52:25 »
Actualización de los motores del Tomcat, por HeatBlur
https://forums.eagle.ru/showthread.php?t=203063
Citar
The Tomcat has a new powerplant model!

While we’ve already undertaken the development of an engine model with the Viggen, we decided last year to completely redesign this portion of our simulation framework, in order to create an much more in-depth and realistic simulation of a turbofan engine. This will also help us in recreating the P&W TF-30 engines for the F-14A, as well as other turbofan, turbojet, or turboshaft engines for our future product lineup.

The F-14B is powered by two F110-GE-400 turbofan engines with variable exhaust nozzles and afterburner augmentation.They are dual-rotor engines consisting of a three-stage fan driven by a two stage, low-pressure turbine and a mechanically independent, aerodynamically balanced, nine-stage high-pressure compressor driven by a single-stage, air-cooled, high-pressure turbine. Engine operation is automatically regulated and maintained electrically by the augmenter fan temperature control unit and by throttle inputs to the main engine control.


This new F110 model has been built entirely from scratch, incorporating many new features and improving the accuracy and fidelity of the engine simulation. The following components of the engine have been modeled based on actual F110 engine data gathered from various sources:
Air Inlet Control System (AICS)
The primary job of the AICS is to provide quality airflow to the engine in sufficient quantities to prevent engine operation issues. This involves a reduction of the speed of air entering the engine’s fan/compressor face. During this process, incoming freestream airflow is slowed and compressed. As a result, ram temperatures and pressures entering the engine are increased. On the F-14 this is achieved primarily by a system of 3 moving ramps per side that are scheduled based on flight conditions. During supersonic flight, these ramps are scheduled to move in a way that creates multiple shockwaves to more efficiently compress incoming air than a conventional duct would. The efficiency of the inlet’s pressure recovery throughout the flight envelope has been captured from real F-14 flight test data for use in the Heatblur F-14. Considerations for ramp actuator malfunctions have been made, which can include thrust loss and reduced stability margin (i.e. higher potential for compressor stall) if the ramps are out of their scheduled positions (i.e. high speed with the ramps in their stowed position...don’t do this!).
Augmenter Fan Temperature Controller/Main Engine Control (AFTC/MEC)
The AFTC/MEC on the F-14 is similar to a FADEC (Full Authority Digital Engine Control) in function. It schedules fuel to the engine and afterburner based on numerous inputs. It also provides limiting functions to prevent engine damage and reduce risk of compressor stalls. RPM, EGT, and acceleration/deceleration are all limited by the AFTC to ensure safe engine operation. Other AFTC functions include engine start control, asymmetric thrust limiting, automatic relight, and fault detection. Fault detection automatically switches the engine control to secondary mode in the event of core overspeed, fan speed signal loss and other abnormal conditions. The AFTC/MEC simulation on the Heatblur F-14 takes in probe temperatures and pressures from the AICS, Mach number, pilot throttle positions, fan and core rpms, and engine ignition status, and outputs demanded fuel valve positions. These valve positions correspond to fuel flows that will cause the engine’s core to accelerate or decelerate as demanded by the pilot. While the pilot can demand a certain core speed, the AFTC is also constantly monitoring other engine parameters, such as N2 RPM and EGT to ensure that engine design limits are not exceeded and engine damage does not occur. Essentially, the AFTC protects the engine from the pilot while trying its best to give the pilot what he/she demands. When AFTC failures occur, the AFTC/MEC model reverts to what is known as secondary mode, in which the MEC governs N2 speed based on throttle inputs, but protection features such as EGT limiting are no longer available. Be aware that engine stall margin is decreased slightly at low rpm in this mode.
Fuel Metering Unit (FMU)
The FMU consists of the system of valves and pumps responsible for carrying out AFTC fuel schedule demands. The AFTC outputs fuel valve position commands which in turn spray high pressure fuel into the combustor and afterburner when in use. The Heatblur F-14 model consists of a system of valves that open/close according to AFTC demands, as well as a shutoff valve for engine fires and automated shutdown commands coming from the AFTC. Failures such as stuck valves and clogged fuel filters may be implemented in the future.
Gas Generator (N2)
The gas generator is the heart of any turbomachinery. Its primary purpose is to provide hot, high pressure air to the combustor. This is done by reducing the speed and increasing the pressure/temperature of the incoming inlet air even further, which the F110 can do at a pressure ratio of in excess of 30:1. The gas generator on the F110 is driven by a single stage high pressure turbine. The gas generator simulation in the Heatblur F-14 is robust, with the speed and acceleration of the core determined by fuel flow from the FMU, the speed of air entering the engine, and the inertia of the core itself. The amount of fuel introduced into the flow by the FMU directly corresponds to changes in torque applied to the power turbine, which in-turn changes the compressor speed as it is connected to the same spool. Failures such as compressor stalls (core airflow disturbances) may affect core speed, as well as any failures of upstream components that affect the fuel flow, such as AFTC/MEC or FMU failures.
Fan (N1)
The fan on the F110 is driven by a two stage turbine, with a bypass duct that is mixed back in to the core flow in the afterburner section. The bypass ratio of the F110 is about 0.85. Low-bypass ratio turbofans such as the the F110 have the benefit of improved fuel economy at cruise speeds, while still maintaining very good high speed performance. This makes them excellent engines in fighter aircraft applications. The Heatblur F-14 fan simulation is driven as a function of core speed, with a given steady state core speed corresponding to a steady state fan speed. Any failures affecting the core will also affect fan speeds.
Combustor/Exhaust Gas Temperature Model
The combustor section of the F110 ensures that high pressure fuel flow is efficiently ignited, dramatically increasing the temperature and pressure of the gases before the flow is expanded through power turbine section. The Heatblur F-14 combustor/EGT simulation is dependent on the amount of fuel being introduced into the engine, which is determined by the AFTC/MEC and FMU models.
Afterburner
The afterburner on the F110 provides extra thrust by introducing additional fuel into the flow after the power turbine section. Fuel flow to the afterburner is controlled by the AFTC and AB Fuel Control (AFC), with its own set of high pressure fuel pumps that cycle fuel back to the engine boost pumps when afterburner is not in use. This ensures that high pressure AB fuel is available at all times to prevent thrust lags and surges when AB is initiated. The Heatblur F-14 afterburner simulation is purely dependent on available AB fuel flow and throttle position, with the extra thrust as a function of AB fuel flow and nozzle position. Failures to the AFTC/MEC, AB fuel pump failures, or exhaust nozzle failures will affect AB operation and performance. AB operation is inhibited when in AFTC/MEC secondary mode.
Starting System
The engine start system is a turbine powered either by a ground air/power cart or via a crossbleed start from the opposite engine. Ground power can achieve approximately 30% N2 before light-off. In our F-14 starter simulation, the ENG CRANK switches open pneumatic valves allowing the ground cart air to begin spool-up of the core. As the core spins up, the MEC primes the engine with fuel and provides ignition and fuel control up to 59% N2 RPM.
Variable Exhaust Nozzle
The variable exhaust nozzle is responsible for controlling the expansion of exhaust flow downstream of the afterburner section. Engine exhaust gases at higher thrust settings are discharged through the nozzle throat at sonic velocity and are accelerated to supersonic velocity by the controlled expansion of the gases. Varying nozzle throat area controls fan stall margin, which optimizes performance. The Heatblur F-14’s nozzle simulation is dependent on Mach number, altitude, throttle position, weight on wheels, engine oil pressure, and AB operation status. Failures in the nozzle will affect engine thrust and stability.


We’re still working on completing our engine simulation. In particular some of the remaining items to be completed pre and post early access include the:

Engine Oil System
Bleed Air Draw Effects
Generator Load Effects
AICS Anti-Ice and Icing Effects
AFTC/MEC Secondary Mode Effects
Reduced Arrestment Thrust System (RATS)
Asymmetric Thrust Limiting
Afterburner Ignition System
Throttle Control Modes (Approach Power Compensator already complete)
Windmill and Cross-start failures and effects
Battle Damage Effects
FOD Effects


This new engine modeling will serve as a robust and deep base for all of our future jet aircraft simulation. An accurate recreation of the aircraft’s powerplant and all of the follow on effects is important, as it allows us to more accurately depict common F-14 flight characteristics, failure states and especially dangerous situations arising from engine related issues. These effects will become even more apparent as we simulate the TF-30 engines as found in the F-14A. Be gentle with those throttles!

Below are a couple of exports from our engine diagnostic interface. The descriptions above each column describe the conditions in which the snapshot of data was taken in.


 
Click to enlarge


Thanks for reading!
Heatblur Simulations F-14 Team
2
4PS - Offtopic / Re:Pantallazos: Solo por diversión.
« Último mensaje por DReaper en 18 de Febrero de 2018, 18:24:44 pm »
Valencia - Tolouse de esta mañana.





3
4PS - Offtopic / Re:Pantallazos: Solo por diversión.
« Último mensaje por DReaper en 16 de Febrero de 2018, 19:31:51 pm »




4
DCS: World - General / Re:DCS: F-18C
« Último mensaje por Silver_Dragon en 16 de Febrero de 2018, 11:39:46 am »
Quinto video del F/A-18C, Navegación TACAN y ADF
5
DCS: World - General / Re:DCS: F-18C
« Último mensaje por Silver_Dragon en 15 de Febrero de 2018, 23:10:15 pm »
Dos updates que no habia puesto del hornet, el primero es la "delicadeza" de las puertas del tres de aterrizaje del hornet que pueden se literalmente arrancadas si nos "pasamos" de velocidad. y se está trabajando en los modo aire-aire del radar, los sistemas defensivos, la navegación via INS, la dinamica de vuelo y computadora de control de vuelo. El proximo video será de la navegación TACAN y ADF.

Citar


A few years ago, I had the pleasure of visiting Lemoore NAS to get some time in one of their F/A-18C dome sims. It was a great experience and provided a great perspective to flying the Hornet. One item that caught me though was just how fragile the gear doors can be when over-sped. Today, we added this as a new damage element to our Hornet.

As mentioned in this week’s newsletter, progress on the Hornet is moving along quickly with much of the work focused on the air-to-air radar modes, defensive systems, INS waypoint navigation, and flight dynamics / Flight Control Computer. Our next Hornet academic video will instruct on Hornet TACAN and ADF navigation.

Thanks,
Matt “Wags” Wagner
Senior Producer

y ED ha completado la implementación de los motores F-404 del hornet, como entidades funcionales, funcionamiento dinamico, separados uno del otro. Sus datos se presentan en el panel del IFEI.

Citar


Under the category of small details, we implemented differential engine modeling this week. Rather than each engine underlying modeling and IFEI indication for RPM, EGT, FF, and OIL PSI being the same, they are now modeled as separate, dynamic entities. While this may seem like a rather small thing, it has required quite a bit of work, but we feel it will provide a much more realistic modeling of the F-404 EPs. In the end, this was a must-do.

Thanks,
Matt “Wags” Wagner
Senior Producer
6
FS / XPlane / P3D - Debriefings / GCLA - GCXO
« Último mensaje por Skorp en 15 de Febrero de 2018, 13:35:13 pm »











































7
DCS: World - General / Re:DCS: World
« Último mensaje por Silver_Dragon en 14 de Febrero de 2018, 17:16:09 pm »
Hotfix 3 disponible
https://forums.eagle.ru/showpost.php?p=3396674&postcount=4
Citar
2018-02-14 HOTFIX 3
Updated several missions of UH-1H Argo Campaign.
Updated several missions of A-10C The Enemy Within Campaign.
MP anticheat. Speed relative explosion power is clamped to 500 m/s.
Controlled Ground units can pass through tunnel wall. Fixed.
Fixed issue with ground AI when given stop and resume triggers returns to previous WP instead of continuing the route.
UH-1H UN Campaign mission 2 trigger will working.
Fixed ME error me_map_window.lua in dynamic weather panel.
Sea waves animation will be works correctly from inside some cockpits.
Multiple flights starting on a FARP at the same time will not spawn on a player.
Tanker will be fill external tanks of aircraft.
B-17G ball turret will fire.
B-17G will attack enemy at second approach.
UH-1H: Fixed issue with barometric altimeters when atmospheric pressure below limit.
AI Radio. Fixed error in wMessage::buildSpeechQ appearing in some conditions.


DCS AV-8B N/A by RAZBAM
Corrected empty fuel tank definition
Cockpit model improvements
External model improvements
Added EHSD Moving Map (Work-in-Progress)
Added TPOD laser ranging
Updated TPOD TDC movements
Updated TPOD target transfer
Corrected aircraft basic empty weight (slightly too low before)
Corrected aircraft basic empty roll inertia (too high before, creating incorrect roll response)
Corrected combat rating not allowed when nozzles not aft or gear down
Corrected very high altitude engine performance (>35000ft, was insufficient before)


DCS M-2000C by RAZBAM
Improved pitch responsiveness
Improved AP responsiveness and control
Improved extreme angle of attack behavior
Improved engine malfunction modeling during in-flow loss
Controls indicator now also shows trim position (previously only shown during AP engagement)
Removed innacurate altitude limitations for AP engagement
Corrected nature of trim control sensitivity to be relative to framerate
Corrected nature of AP heading and trim control sensitivity to be relative to framerate
Corrected helmet visor animation and reversal between external and cockpit view
Corrected direction of trim indicator in controls indicator
Corrected innacurate pitch moment with airbrake deployment
8
FS / XPlane / P3D - Debriefings / GCHI - GCLA
« Último mensaje por Skorp en 14 de Febrero de 2018, 09:20:35 am »






































9
FS / XPlane / P3D - Debriefings / GCGM - GCHI
« Último mensaje por Skorp en 13 de Febrero de 2018, 08:44:16 am »
GCGM - GCHI




















































10
4PS - Offtopic / Re:Pantallazos: Solo por diversión.
« Último mensaje por Skorp en 13 de Febrero de 2018, 06:48:02 am »
Wow :pulgares:
Páginas: [1] 2 3 ... 10